Kyocera FS-1024MFP Operation Manual page 172

Default Setting (System Menu)
Login User Name: L b
********************
Login Password:
Timer Setting:
1
Sleep Timer
*********************
2
PanelReset Timer
3
Low Power Timer
Auto Err. Clear: a b
1 *Off
*********************
2
On
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Sys. Menu/Count.:a b
3
System
4
Administrator
5
********************* Common Settings
8-26
4
[ Login ]
5
a b
[ Exit ]
6
7
8
9
1
[ Exit ]
A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
The Timer Settings menu appears.
Press the or key to select [Auto Err. Clear].
Press the OK key. Auto Err. Clear appears.
Press the or key to select [Off] or [On].
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
or
OPERATION GUIDE