Kyocera FS-1024MFP Operation Manual page 178

Default Setting (System Menu)
Timer Setting:
1
Err. Clear Timer
*********************
2
Sleep Timer
3
PanelReset Timer
PanelReset Timer:D b
Low Power Timer
You can specify the amount of time to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments). The default setting is 2 minutes.
For more information on Low Power Mode, refer to Auto Low Power Mode on page 3-4.
Use the procedure below to set the Low Power Mode.
Sys. Menu/Count.:a b
3
System
4
Administrator
5
********************* Common Settings
Common Settings: a b
1
********************* Language
2
Default Screen
3
Sound
8-32
a b
[ Exit ]
(5 - 495)
******90*sec.
[ Exit ]
[ Exit ]
5
The Timer Settings menu appears.
6
Press the or
Timer].
7
Press the OK key. PanelReset Timer appears.
8
Press the or
Set the amount of time before resetting the
message display on the panel in seconds. You
cannot use the numeric keys to enter this value.
9
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
key to select [Panel Reset
key to set the PanelReset Timer.
OPERATION GUIDE
or