Kyocera FS-1024MFP Operation Manual page 197

Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value
are as follows:
Item
None
l Solid Line
m Dotted Line
n Positioning Mark
Use the procedure below to select the default value for border line.
Sys. Menu/Count.:a b
3
System
4 Administrator
5
********************* Common Settings
Common Settings: a b
1
********************* Language
2 Default Screen
3
Sound
Function Default: a b
1
********************* Color Selection
2 Scan Resolution
3
FAX Resolution
Detail Setting:
1
********************* 2 in 1 layout
2 4 in 1 Layout
3
Border Line
OPERATION GUIDE
No border line.
Draws solid border lines.
Draws dotted border lines.
Puts a mark on the border line position.
1
[ Exit ]
2
[ Exit ]
3
4
[ Exit ]
5
6
a b
[ Exit ]
7
Default Setting (System Menu)
Description
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
Press the OK key. The Common Settings menu
appears.
Press the or key to select [Function Default].
Press the OK key. The Function Default menu
appears.
Press the or key to select [Detail Setting].
Press the OK key. The Detail Setting menu
appears.
Press the or key to select [Border Line].
or
8
8-51