Kyocera FS-1024MFP Operation Manual page 209

Printer:
1
********************* Eco Print
2 Override A4/LTR
3
Copies
FormFeed TimeOut:D b
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below
shows the available settings. The default setting is LF Only.
Item
LF Only
LF and CR
Ignore LF
Use the procedure below to specify a LF action.
Sys. Menu/Count.:a b
5
Common Settings
6
Copy
7 Printer
*********************
OPERATION GUIDE
a b
[ Exit ]
(5 - 495)
******30*Sec.
Only line feed performed.
Line feed and character return performed.
No line feed performed.
[ Exit ]
Default Setting (System Menu)
2
Press the OK key. The Printer menu appears.
3
Press the or key to select [FormFeed
Timeout].
4
Press the OK key. FormFeed Timeout appears.
5
Press the or key to set the Form Feed
Timeout. You can set the timeout delay in seconds.
You cannot use the numeric keys to enter this
value.
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
1
In the Sys. Menu/Count. menu, press the
key to select [Printer].
8
or
8-63