Rear Cover - Kyocera FS-1024MFP Operation Manual

Troubleshooting

Rear Cover

Follow the steps below to clear paper jams of the rear cover.
10-12
5
Return the drum unit to its position, aligning the
guides at both ends with the slots in the machine.
6
Insert the developer unit together with the toner
container, back into the machine. Close the front
cover. The machine warms up and resumes
printing.
1
Open the rear cover and remove the jammed paper
by pulling it out.
CAUTION:
The fuser unit inside the machine is hot. Do
not touch it, as it may result in burn injury.
If the paper is jammed inside the fuser unit, open
the fuser cover and remove the paper by pulling it
out.
2
Close the rear cover, and open and close the top
cover to clear the error. The machine warms up and
resumes printing.
OPERATION GUIDE