Checking Gps Receiving Status - JRC JMA-7710-6 Instruction Manual

8.5

8.5.4.2 Checking GPS Receiving Status

Check the GPS receiving status.
• Item
Own ship position:
Built-in GPS time:
Elevation:
DOP:
Receiving satellite:
Azimuth and elevation: Displays the azimuth and elevation angle of the receiving satellite.
Signal level:
Receiving status:
• The GPS receiving status is displayed only when a sensor-type GPS receiver such as JLR-4310 is
connected.
It is not displayed when an external navigation system is used.
1. Press the
Procedures
2. Press the
3. Press the
The GPS receiving status appears.
4. Press the
Exit
Displays the longitude and latitude of the own ship after measurement.
Displays the universal time measured by the GPS receiver.
Displays the elevation of the own ship. When "2D" is selected for the fixed
mode, however, the antenna height input as the default is displayed.
Displays the accuracy of the measurement results. GPS letters blink when it is
20 or lower, indicating a poor accuracy.
Displays the satellite number currently available for measurement.
Displays the signal level of the receiving satellite. The signal with an intensity
of 20 or lower may not be used for measurement.
Search = Status when the satellite is being searched.
Tracking = Status when the satellite is being tracked.
Demodulation = Status when the data from the satellite is being demodulated.
Use = Status when the satellite is being used for measurement.
SUB
key to open the SUB MENU.
MENU
9
key twice to open the INIT SET #2 menu.
7
key to open the INITIALIZE GPS/GPS STATUS menu.
SUB
key.
MENU
8 – 39