Adjusting Position By Fixing Own Ship At Screen Center - JRC JMA-7710-6 Instruction Manual

8.5.7.4

Adjusting Position by Fixing Own Ship at Screen Center

1. Follow procedures 1 and 2 in subsection 8.5.7.1 to open the INIT SET #3
Procedures
menu.
2. Press the
3. Press the
(north latitude)/S (South latitude) using numeric keys (
and press the
4. Enter an center position value for E (east longitude) W (west longitude)
using numeric keys (
The data input from the GPS, if any, is prioritized.
Exit 5. Press the
Note
G Use this function can be used only when the plotter mode is selected.
Init set #3
INIT
SET #3
1. SHIFT COAST LINE #1
2. SHIFT COAST LINE #2
3. LAT ／ LON CORRECTION
4. CHART CENTER POSITION
5. DATE ／ TIME
6.
4
key to select "CHART CENTER POSITION".
4 ENT
key or key, enter an center position value for N
ENT
key.
9
0 to
SUB
key.
MENU
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 0˚ 00.000'
E 0˚ 00.000'
OFF UTC
8 – 52
0
ENT
) and press the key.
0. PREV
9. NEXT
LOCAL
8.5
9
to )
8