JRC JMA-7710-6 Instruction Manual page 151

1. Press the
the NAV INFO menu.
2. Press the
3. Press the
The menu will disappear and the destination number will be displayed on the screen.
4. Move the cursor to the destination number mark and press the
NAV INFO
NAV INFO
1. SETTING WPT ／ CANCELLATION WPT
2. WAYPOINT INPUT
Caution : When the destination is used for setting a navigation line, a message of "Currently Used" will
be displayed and it cannot be deleted.
To input comments for the destination
- Comments can be input using alphabet characters, numerals, and special characters.
- A total of 20 characters can be input in two lines with each 10 charters per line.
- Input the number of geodetic datum using the first two characters. (Refer to the list of geodetic data on
page 8-37.)
- Input an arbitrary name for identification using the third and succeeding characters.
1. Press the
Procedures
the NAV INFO menu.
2. Press the
side of the
destination number that was input on the destination input item, and press
ENT
the
SUB
4
, ,
MENU
1
key to select "SETTING WPT/CANCELLATION WPT".
ENT
key.
LAT ／ LON
00 N 0° 00.000'
E 0° 00.000'
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ
ａｂｃｄｅｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘｙｚ
０１２３４５６７８９ ＋−， ．＃（）￥＠＊；' "／
SUB
4
, ,
MENU
2
key to select "WAYPOINT INPUT", press the minus (-)
RANGE
key or plus (+) side of the
2
or key to move to the input item.
3 – 90
4
9
, and keys in this order to open
COMMENT
XXXXXXXXXX
XXXXXXXXXX
4
9
, and keys in this order to open
RANGE
3.7
CLR
key.
0. PREV
9. NEXT
key to select the
3