Checking The Gps Status - JRC JMR-5406-X Instruction Manual

[Specification] tab
The [Specification] tab displays the equipment licence information when the equipment licence is
available.
Item
Equipment licence
information
Save to USB Device
15.1.3

Checking the GPS status

[Operation procedure]
Confirm the GPS Status by performing the following menu operations.
[Menu] button → Maintenance → GPS Status
The following contents are displayed.
Item
Date/Time (UTC)
LAT / LON
Altitude
Fix Mode
DOP Level
RAIM Level
WER
RSSI
RAIM Status
Fix Status
Ver.
The following table shows the contents displayed in the satellite information list section.
Item
System
Satellite No.
Fix
Azimuth
Elevation
Level
Displays the licence standard of the equipment licence.
When this button is clicked on, the contents that are displayed are
saved in the USB memory device in text format.
Displays the date and time when information is received from GPS.
Displays the latitude and longitude.
Displays the antenna altitude.
Displays the position fixing mode. One of No Fix, 2D, and 3D is
displayed.
Displays the HDOP level.
Displays the RAIM level.
Displays one of 10 m/30 m/50 m/100 m/Off.
Displays the beacon signal error rate.
Displays the signal strength.
Displays the RAIM status.
Displays one of Safe/Caution/Unsafe/No Fix.
Displays the position fixing status.
Displays one of No Fix/GPS/DGPS.
Displays the ROM version. The content displayed is R26.00 and so on.
Displays the satellite positioning system.
Displays one of GPS/QZSS/BDS/GLONASS/Galileo.
Displays the visible satellite number.
Displays the satellite positioning status.
Displays one of Use/Demodulation/Non-Demodulation/None-use.
Displays the azimuth angle.
Displays the elevation angle.
Displays the SNR signal strength.
15-3
Displayed information
Displayed information
Displayed information
Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27