Turning On Or Off Display Of Marks And Lines By Specifying Color Or Shapes - JRC JMA-7710-6 Instruction Manual

3.7
3.7.5 Tuning On or Off Display of Marks and Lines by Specifying
Color or Shapes
- This function enables to display the marks with the desired color and shape. Further, display can be set to
OFF.
- If the marks with the desired color and shape are displayed, the marks with other colors and shapes will
not be deleted.
- When "ALL" is selected, marks will all colors and shapes will be displayed.
1. Press the
Procedures
to open the DISP NAV INFO menu.
2. Press the
3. Press the
(Multiple shapes can be selected.)
The selected mark will be underlined and the marks with the desired shape will be
displayed.
4. Press the
so select a color and press the
selected.)
- When not displaying the marks, put the already selected mark shape or
mark color to reverse display and press the
DISP NAV INFO
DISP
NAV INFO
1. DISP WPT
2. DISP WPT NUMBER ／ COMMENT
3. DISP MARK COLOR ／ TYPE
SUB
4
9
, ,
MENU
3
key to select "DISP MARK COLOR/TYPE".
3
key to select the shape and press the
3
key over again, then the reverse display moves to colors,
OFF
OFF
TYPE ALL
COLOR ALL WHT SKY BLU GRN YEL PNK RED
3 – 95
4
9
, , and keys in this order
ENT
key. (Multiple colors can be
ENT
key.
ON
ON
X
ENT
key.
0. PREV
9. NEXT
p ~ o
Y