Table of Contents
Advertisement
Chapter 7 INITIAL SETTINGS
7.9 JRC GPS ( for future enhancements)
This function is currently not available. Will be implemented with future version of hardware
/software.
This setting is available only JRC GPS receivers directly connected to the connector for which "GPS" is
engraved at the rear of the cabinet.
7.9.1 GPS STATUS DISPLAY
Display the reception status of the GPS receivers ( GPS, DGPS and WAAS receivers) currently connected.
This setting is available only for JRC GPS/DGPS/WAAS receiver directly connected to the connector for
which "GPS" is engraved at the cabinet. This function cannot indicate with transmission state.
90
Advertisement
Table of Contents
