Operation Outline Of The Function Setting Items - JRC JMA-7710-6 Instruction Manual

3.4.4 Operation Outline of the Function Setting Items

See below for the operation outline of each function setting item.
[Page 1] 1. MODE
• Select the name of the function displayed on the top-left corner of the screen when the function mode
is selected.
• When the mode is reset to the mode set at factory delivery, the initial value of the selected mode is
called.
• The following eleven modes are available.
COAST : Use this mode for monitoring a comparatively near range where there are many
ships such as a bay or a coastal line. (Emphasizes resolution)
DEEP SEA : Use this mode for monitoring a comparatively far range such as open sea.
(Emphasizes a far range sensitivity)
FISH NET : Use this mode for searching for small targets hidden by sea clutter such as net edges.
(Emphasizes sea clutter suppression; the sensitivity of moving target deteriorates
slightly)
STORM : Use this mode when there are many rain/snow clutter or sea clutter due to strong
wind and rain. (Emphasizes suppression of rain/snow clutter or sea clutter; the
sensitivity deteriorates slightly)
CALM : Use this mode when there are few rain/snow clutters or sea clutter.
RAIN : Use this mode when there are many rain clouds although the sea clutter is low.
(Emphasizes rain/snow clutter suppression; the sensitivity deteriorates slightly)
BIRD : Use this mode for searching a flock of several tens of sea birds flying low at a near
range or for searching for a flock of several hundreds of sea birds flying high at a far
range.
LONG : Use this mode for monitoring a comparatively far range on an open-sea in order to
search for small targets.
BUOY : Use this mode for searching small targets such as radio buoy outside of the sea
clutter. (Displays targets of low detection probability)
USER 1 : General-purpose mode. Use this mode when the mode is not applicable to any of
the nine modes indicated above.
USER 2 : General-purpose mode. Use this mode when the mode is not applicable to any of
the nine modes indicated above.
Page 1
1. MODE
2. PROCESS
3. IR
4. AUTO STC/FTC
5. TGT EXPANSION
6. SAVE PRESENT STATE
(Select the name to be used)
OFF PROC1
OFF IR1
OFF AUTO STC
OFF EXP1
3 – 64
PROC2 PROC3
IR2 IR3
AUTO FTC
EXP2 EXP3
3.4
3