Maintenance Menu; Antenna Switch - JRC JMA-7710-6 Instruction Manual

8.5.6 Maintenance Menu

The maintenance menu is used only by our service personnel during installation. Users are requested not to
change the setting (bold faced items).
Maintenance Menu
MAINTENANCE MENU
Press an item number key.
0. PREVIOUS MENU
1. ANTENNA HEIGHT
2.

3. ANTENNA SWITCH

4. PARTIAL MASTER RESET
5. ALL MASTER RESET
6. INTERNAL SETTING to CARD 2
7. CARD 2 to INTERNAL SETTING
8. MEMORIZE USER SETTING
9. RESTORE USER SETTING
To close this menu, Press (SUB MENU) key.
8.5.6.1 Antenna Switch
"DISCARD" is set on regular shipment.
Transmission can be enabled while the rotation of the scanner unit is stopped.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
When "TRANSFER" is selected, transmission is enabled while the rotation of the
scanner unit is stopped.
6. Press the
Exit 7. Press the
UP to 5M 5–10M
TRANSFER DISCARD
SUB
key to open the SUB MENU.
MENU
9
key four times to open the INIT SET #4 menu.
1
key to open the MAINTENANCE MENU.
3
key to select "ANTENNA SWITCH".
3
key to select "TRANSFER" or "DISCARD".
ENT
key to confirm the setting.
SUB
key.
MENU
8 – 44
10–20M MORE 20M
8.5
8