JRC JMA-7710-6 Instruction Manual page 193

Setting the video HIGH level
The video HIGH level is a signal level used for tracking a target in the near distance.
As the setting value is smaller, the target with a weaker signal becomes easy to track, but if it is too small, the
sea clutter return and the like are tracked.
1. Press the
Procedures
level" to select "VIDEO HIGH LEVEL".
2. Press the
press the
3. Press the
Exit
Setting the video LOW level
The video LOW level is a signal level used for tracking a target in the far distance. When a weak target in the
far distance is difficult to track, decrease the setting value.
When the level is increased exceedingly, the noise is tracked.
1. Press the
Procedures
level" to select "VIDEO LOW LEVEL".
2. Press the
press the
3. Press the
Exit
4
key twice in the procedure 6 of "Setting the video TD
0 9
to keys to enter the value of the video level and
ENT
key to fix this setting.
SUB
key.
MENU
5
key twice in the procedure 6 of "Setting the video TD
9
0
to keys to enter the value of the video level and
ENT
key to fix this setting.
SUB
key.
MENU
5 – 28
5.9
5