JRC JMA-7710-6 Instruction Manual page 290

11
9) Screen display mode:
10) Variable range scale:
11) Electronic cursor:
12) Cursor:
13) Tuning method:
14) Sea clutter restraint:
15) Rain clutter restraint:
16) Radar interference rejection: Built-in
17) Bearing scale:
18) Bow display:
19) Guard zone alarm:
20) Off center:
21) TM display:
22) TM reset position:
23) Double zoom:
24) Radar trail:
25) Pulse width switch:
26) Target enhancement:
Radar mode
North-up (TM/RM/SRM/CTM), course-up (TM/RM/SRM/
CTM), head-up (RM/SRM) and stabilized course-up (CTM)
Composite mode
North-up (TM/CTM) and course-up (TM/CTM)
Plotter mode (when optional NDB-33 is installed)
North-up (TM) and course-up (TM)
2 (digital display)
Range display unit: nm and km
0.000 to 295.0nm (0.000 to 547.0km)
2 (digital display)
Second EBL can be floated (first one is fixed).
Second EBL can be switched to parallel index lines.
000.0 to 359.9 degrees (in 0.1 degree unit)
Can be switched between bearing display unit, relative bearing and
true bearing.
Displays the range, bearing and L ／ L (when GPS and GYRO are
connected.)
Moved using the trackball.
Manual and auto (tuning indication bar attached)
Manual and auto
Manual and auto
1-degree scale, 360 degrees
Electronic (stern marker can also be displayed)
Can be switched between "OFF", "IN" and "OUT".
Buzzer sound available.
Range storing function equipped (1 sector ring)
Up to 66% of radius of any scale except 96 and 120nm
Built-in (excluding 96 and 120nm)
66% of radius
Manually resettable
Within 66% of radius from the zoom center (excluding 0.125nm)
* Available only when RM is selected in the radar mode.
TM radar trail in TM
RM radar trail in RM
Radar Trails interval: 1min, 3min, 6min, 12min, 15min, 30min,
60min, continuous
Radar trail can automatically be cleared by switching range or
resetting TM.
Long/short (0.75, 1.5, 3, 6 and 12nm)
Built-in
11 – 5