JTS UF-10R Product Manual page 22

10.Name: set user name
(1) Press , keys to Name; press SET to enter into "Name" screen; set user
name.
(2) Press keys to select texts; after confirmation press SET key to set the next
character; if no characters is needed, select "blank" character; after confirmation
press SET key to save setting; Name consists of 10 characters at maximum.
11.Key Lock :
(1) Press , keys to Key Lock; press SET to enter into "Key Lock" screen; set
Key Lock
(2) Select "Lock On" to lock all keys to prevent accidental touch; if setting is Lock
On, mute function is not affected.
(3) If setting is "Lock On", except mute, pressing any other keys will prompt the
following screen.
(4) Cancel Lock On: press SETUP key for 2 seconds to go directly to "Key
Lock" setup screen, select "Lock Off ".
Press SET key to save setting.
12.Exit: leave function setup menu
Press , keys to Exit; press SET key to leave menu.
Note: Pressing the power key will make the LCD back to main window.
39
Professional Wideband (60~75MHz) True Diversity System
Name
Key Lock
Exit
User Name
UF-1 0 TB
Char: 5/10
Indicate which
character currently
is set
10 characters
available
Key Lock
Exit
Freq.
Key Lock
ON
OFF
Press Set
for 2 Sec.
to unlock
keypad.
Key Lock
ON
OFF
Exit
Freq.
Group
6-4 Installation of Condenser Microphones
(1) Lavaliere microphone
Attach lavaliere microphone to a tie, lapel, where is suitable for sound pick-up. Plug the
connector into input socket on the body-pack transmitter.
UHF PLL Transmitter
(2) Headset microphone
Put the headband behind your head, and fix the temples on your ears as shows, then
adjust the gooseneck to have best miking. Plug the connector into input socket on the
body-pack transmitter.
(3) Instrument Microphones
The system is compatible with JTS various instrument microphones.
For detail please refer to user' s manuals of these microphones.
MIC IN
UHF PLL Transmitter
40