JTS UF-10R Product Manual page 20

6-3 System operation setup for Body-Pack transmitter // UF-10TB
6-3-1 Turn power on for UF-10TB Body-Pack transmitter (Fig. 5)
(1) Turn on power: press power key once
(2) Shut down power: press and hold power key for 2 seconds.
(3) Mute setup : When microphone is in use and mute setup is needed:
Set mute: short press power key once; indicator lamp flashes in red.
Cancel mute: short press power key again to cancel mute.
(4) Leave the setting window: press the power key once the LCD display will return to the
main window.
6-3-2 Menu function setup :
Press and hold SET key for 2 seconds; enter into function setup menu;
(1) Press , keys to select desired item; press SET key to enter into menu.
(2) After entering into menu, press
SET key to save setting.
1. Freq.: set frequency
(1) Press , keys to Freq. ; press SET key to enter into frequency adjustment
screen.
(2) After going to frequency adjustment screen, first adjust left 3 digits ;
Press , keys with "+/-" 1 MHz as unit change; after adjustment press
SET key to adjust right 3 digits
(3) Adjust right 3 digits : press ,
after adjustment press SET key to save setting.
35
Professional Wideband (60~75MHz) True Diversity System
Fig. 5
UHF PLL Transmitter
, keys to select desired value : press
keys with "+/-" 0.025 MHz as unit change;
2. Group: set group and channel
(1) Press
(2) After entering into the screen, press
press SET key to switch to Channel setup.
(3) Press
3. Sensit: microphone sensitivity setup
(1) Press
screen.
(2) Press
to save setting ; adjustable range from -18dB to +12dB.
4. Attenuate : Microphone Attenuate
Freq.
(1) Press
Group
Sensit.
Attenuate
(2) Press
Frequency
ON: -20dB attenuation
G: 1 C:1
625 .500 OFF: No attenuation
Frequency
G: 1 C:1
625 . 500
, keys to Group; press SET key to enter into "Group" setup screen.
, keys to select the desired group ;
, keys to select the desired channel; press SET key to save setting.
, keys to Sensit; press SET to enter into "Sensit" sensitivity setup
, keys to adjust sensitivity with 3dB as unit change ; press SET key
, key to Attenuate. Press SET to enter "Attenuate"setup screen.
, key to select ON or OFF
Group
Sensit.
Attenuate
Device ID
Group/Chan
G: 1
C: 1
625 . 500
Group/Chan
G: 1
C: 1
625 . 500
Sensit.
Attenuate
Device ID
Remoset
Sensitivity
12 dB
Attenuate
Device ID
Remoset
RF Power
Attenuate
ON
OFF
36