Download  Print this page

JTS UF-10R Product Manual page 21

Professional wideband (60~75mhz) true diversity system
Hide thumbs

Advertisement

5. Device ID: set device ID
(1) Press
,
keys to Device ID; press SET key to enter into "Device ID" setup
screen.
(2) Press
,
keys to adjust default ID between 0 and 255; press SET key to
switch to set ID: ON/OFF.
ID: ON → only if microphone ID and receiver ID are the same , REMOSET
function will work.
ID: OFF → regardless of ID, the transmitter will accept REMOSET data from all
receivers of the same band and with ID Off.
Press SET key to save setting.
The setting will affect the use of REMOSET.
6. REMOSET: set REMOSET function on/off
(1) Press
,
keys to REMOSET; press SET to enter into "REMOSET" setup
screen.
(2) Press
,
keys to select ON or OFF; press SET key to save setting.
Setting ON: REMOSET function available.
Setting OFF: disenable REMOSET function; and saves microphone power.
37
Professional Wideband (60~75MHz) True Diversity System
7.RF Power: set transmission power
Device ID
(1) Press
Remoset
transmission power.
RF Power
Contrast
(2) Press
Device ID
to save setting.
255
Attention: if setting is Hi, the RF signal is stronger while microphone consumes
ID : OFF
more power.
Device ID
Note: Hi represents 50 mW and Low 10 mW.
255
OFF /
ON
8. Contrast: adjust screen contrast
Device ID
(1) Press
adjust screen contrast.
0
OFF
/ ON
(2) Press
contrast ; otherwise, lower contrast; -3 ~ 0 ~ +3 total seven adjustable levels.
Remoset
RF Power
Contrast
9.Light T.: set screen backlighting time
Light T.
(1) Press
screen backlight time.
Remote Set
ON
OFF
(2) Press
(shut off ), 5~30Sec (5 Sec as unit change), Always ON (always on).
The longer screen backlight time, the shorter battery life.
,
keys to RF Power; press SET to enter into "RF Power" screen;set
,
keys to select transmission power as Hi or Low; press SET key
,
keys to Contrast; press SET to enter into "Contrast" screen ;
,
keys to adjust contrast; higher number represents higher
,
keys to Light T.; press SET to enter into "Light T. " screen; set
,
keys to select backlight time 3 options available; Always OFF
RF Power
Contrast
Light T.
Name
RF Power
Hi
Low
Contrast
Light T.
Name
Key Lock
Contrast
0
Light T.
Name
Key Lock
Exit
Light Time
30 Sec.
38

Advertisement

loading

  Also See for JTS UF-10R

  Related Manuals for JTS UF-10R

This manual is also suitable for:

Uf-10tbUf-10th