Parts Identification & Accessories - JTS UF-10R Product Manual

Ear-hook Microphone
Model No............................... CM-801/CM-804i
Connector.............................. 801C4 (4 pin mini XLR)
Option Connector........... 801C3 (3 pin mini XLR)
801CS (3.5 stereo plug)
Frequency Response...... 60~15,000 Hz
Polar Pattern.......................... Omni-directional
Sensitivity (at 1000Hz) -64±3 dB
Impedance............................. 1.8kΩ
Max. SPL for 1% THD 130dB
Compatible Instrument Microphone
Model No............................... CX-500
Connector.............................. 4P Mini XLR
Frequency Response...... 20~20,000 Hz
Polar Pattern.......................... Omni-directional
Sensitivity (at 1000Hz) -58±3dB
Impedance............................. 1.5kΩ
Max. SPL for 1% THD 130 dB
Good For................................. Violin
Model No............................... CX-508W
Connector.............................. 4P Mini XLR
Frequency Response...... 50~18,000 Hz
Polar Pattern.......................... Cardioid
Sensitivity (at 1000Hz) -67±3 dB
Impedance............................. 220Ω
Max. SPL for 1% THD 130 dB
Good For................................. Winds
7
Professional Wideband (60~75MHz) True Diversity System
CM-8015/CM-825i
801C4 (4 pin mini XLR)
801C3 (3 pin mini XLR)
801CS (3.5 stereo plug)
50~18,000 Hz
Omni-directional
-53±3 dB
1.2kΩ
130dB
CX-500F CX-520
4P Mini XLR 4P Mini XLR
50~18,000 Hz 50~18,000 Hz
Omni-directional Supercardioid
-58±3dB -78±3dB
1.5kΩ 600Ω
130 dB 148 dB
Flutes Harmonica
CX-516W
4P Mini XLR
30~18,000 Hz
Cardioid
-67±3 dB
220Ω
130 dB
Accordion
4. Parts Identification & Accessories
4-1 Broadband true diversity receiver key function and
LCD description//UF-10R
(1) Front panel
Power switch: press switch once to turn power on; press and hold for 2 seconds to shut
1
down.
EXIT key: when UF-10R is under "setup menu", press EXIT to cancel selection or leave
2
menu.
Jog dial: when main menu is on screen, turn jog dial to adjust volume (MUTE,
3
-31~0dB); on "setup menu" screen, turn jog dial to select setup item, after entering into the
selected item turn jog dial to adjust the value.
SETUP key: press and hold for 2 seconds to enter "setup menu"; press SETUP key to
4
enter into setup mode for jog dial; after adjustment of value, press SETUP key to save the
setting.
REMOSET: Press REMOSET once to send frequency data to a microphone.
5
6 LCD: refer to "(2) Receiver LCD instruction".
AF: indicate current audio signal strength.
7
RF: indicate current radio frequency signal strength.
8
Antenna: 1/2 wave length antenna.
9
9
wireless receiver
5 7
8
2 1
UF-10R PUSH / CONTROL
SETUP EXIT
6 4 3
8