Overlapping Cell Configuration - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
3. Look at the Station Adapter's front-panel LED indicators, or the PCMCIA PC
Card's Site Survey application, to check signal strength.
4. Make any necessary adjustments. For example, adjust the antennas, the location
of the Station Adapter, or the location of the Access Point.
5. Set up the other workstations.
5.1.2 O
VERLAPPING
When two adjacent Access Points are positioned close enough to each other, a part
of the coverage area of Access Point #1 overlaps that of Access Point #2. This
overlapping area has two very important attributes:
82
Figure 5-3. Single-Cell Configuration.
-C C
ELL ONFIGURATION