Pro 11 Series Product Line; Access Point (Lw0050A, Lw0055A, Or Lw0060A-Can) - Black Box LW0050A Manual

1.3 Pro 11 Series Product Line

These are Pro 11 Series Wireless Ethernet Units with Integral 2-dBi Antennas.
Ethernet Access Point, Monitor Cable, Power Supply ............................LW0050A
Single-Port Station Adapter, Power Supply ............................................LW0051A
Four-Port Station Adapter, Power Supply ................................................LW0052A
Ethernet Workgroup Bridge, Power Supply..............................................LW0053A
3-Mbps Type II PCMCIA Adapter with
Folding Diversity Antenna and Software ..............................................LW0054A
If you're using one or two detached antennas, use one of these units.
Ethernet Access Point, Monitor Cable, Power Supply,
Mounting Bracket ................................................................................LW0055A
Canadian version ..............................................................LW0060A-CAN
Single-Port Station Adapter, Power Supply, Mounting Bracket ..............LW0056A
Canadian version ..............................................................LW0061A-CAN
Four-Port Station Adapter, Power Supply, Mounting Bracket ..................LW0057A
Canadian version ..............................................................LW0062A-CAN
Ethernet Workgroup Bridge, Power Supply, Mounting Bracket................LW0058A
Canadian version ..............................................................LW0063A-CAN
Type II PCMCIA Adapter with MMCX Connectors ..................................LW0059A
Note: Pro 11 series products are not compatible with Pro series products, but the Pro
Series can be upgraded to be compatible with the Pro 11 series. Call Technical
Support for information.
1.3.1 A P
CCESS OINT
The Access Point is fully compliant with the IEEE 802.11 wireless LAN standard.
The Access Point is a wireless hub that provides access for wireless workstations into
wired Ethernet LANs. It also contains the wireless relaying function that enables
workstations equipped with a Station Adapter (Station Adapter, Bridge, or
PCMCIA Adapter) to communicate with one another inside the cell coverage area
(even if they are not in direct line of sight) via the Access Point. Any two wireless
stations in two different cells can communicate through their Access Points.
The Access Point can support various data rates simultaneously at 3 Mbps, 2 Mbps,
or 1 Mbps.
(LW0050A, LW0055A,
CHAPTER 1: Introduction
LW0060A-CAN)
OR
13