Using The Upgrade Kit Program - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
5. Repeat steps 2 and 3 with other locations. The recorded readings should give
you a good idea of where reception is good or bad, and where many Access
Points overlap unnecessarily.
6. When you are done recording, press Print. A site survey report appears
containing information about each recorded location, including signal strength
of associated Access Point and of neighbor Access Points. You can print the file
by pressing the Print button, or save the file by pressing the Diskette button.
You can save the file as text, or as a QRP file viewable using this application
only.

4.7 Using the Upgrade Kit Program

The Upgrade Kit program is an application that allows you to upgrade previous
versions of the firmware, drivers, and utilities of the PCMCIA Adapter, if installing
on a machine that had a previous version installed. The Upgrade kit can be
obtained at www.blackbox.com. At this point, please call Technical Support for
assistance.
In addition, under Windows 95/98 you can use this program as another way to
install the firmware, driver, and utilities.
Upgrading causes your system to lose all configuration parameters that
were set previously.
U P
PGRADE ROCEDURE FOR
1. Run the UPGR4402.EXE program from the diskette. The following dialog box
is displayed.
PCMCIA PC Card Upgrade Kit
This Wizard will install PCMCIA PC Card Firmware, driver and
Application utilities.
Firmware Version:
Driver Version:
Applications Version:
WinZip
2. Click Setup. The following dialog box is displayed.
70
W 95/98
INDOWS
4.4.7
4.4.0
4.4.0
® ©
Self-Extractor Nico Mak Computing, Inc. http://www.winzip.com
NOTE
Setup
Cancel
About