Event Log; Display Neighboring Access Points; Access Control Menu - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
3.6.4 E L
VENT OG
• Display Event Log — The error messages that the unit displayed since the last
Load Full Factory Defaults reset or since the log was erased by Erase Event
Log. The Event log stores events in four levels of error notifications: MSG
(Message), WRN (Warning), ERR (Error), and FTL (Fatal).
• Erase Event Log — Erases the event log.
• Event Storage Policy — Defines severity policy for storage level of the event
log. There are four levels of storage policy:
0 — Store all events (beginning at message level).
1 — Store all events from warning level up.
2 — Store all events from error level up.
3 — Store fatal events only.
3.6.5 D N
ISPLAY EIGHBORING
Displays neighboring Access Points on the same ESS for both the Access Point and
the station units.

3.7 Access Control Menu

Access Control functions enable the System Administrator or Installer to limit
access to Local Terminal Maintenance setup and configuration menus.
Pro 11 Series (Workstation Bridge)
Version: 4.211
Date: 25 Jun 1998 15:46:24
Access Control menu
===================
1 - Change Access Rights
2 - Change Installer Password
3 - Show Current Access Right
Select option > 1
48
A P
CCESS OINTS
Figure 3-9. Access Control Menu.