Black Box LW0050A Manual page 74

PRO 11 SERIES WIRELESS ETHERNET
5. If the Adapter is already installed, stop the Adapter as follows: from the Control
Panel, double-click the PCMCIA Adapter icon, select the PCMCIA PC Card,
and click Stop. Remove the PCMCIA Adapter from the slot. Wait for about 15
seconds and then reinsert. Click Next.
PCMCIA PC Card Upgrade
6. The MAC address of the PC and the hardware version of the PCMCIA Adapter
are displayed in a read-only field.
If you purchased the PCMCIA PC Card without the Wired Equivalent Privacy
(WEP) feature and want to enable this feature, contact Technical Support, or
Double-click the WEP field value (set to NO by default). A Password dialog box
appears.
Enter the supplied password and click OK to return to the dialog box from step
2.
The password for enabling the WEP feature can only be obtained from
Black Box.
7. Follow the on-screen instructions and check the Adapter's LEDs as described in
Section 4.3.2. Click Next. The following dialog box is displayed.
72
Step 02
PCMCIA PC Card details
Mac Address
Hardware version
Wep Enabled
Verify that both LEDs blink,
otherwise contact Technical Support.
You are now ready to perform the firmware upgrade.
Please press the "Next" button to start
the download process.
Next>
<Back
NOTE
00-20-D6-05-3D-57
G
No
Close About