Checking The Led Indicators; Initial Configuration - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
U PCMCIA A
NINSTALLING
1. From the Windows Start menu, select Settings, and then select Control Panel.
Double-click on the Network icon, click on the Configuration tab, select Brz
802.11 Wireless LAN PC Card, and click Remove.
2. Insert the Black Box Drivers diskette. From the Windows Start menu, select
Run, and type a:\DrvClean.
3. When notified that the PCMCIA Adapter driver has been deleted, click Setup.
4. Restart the computer.
4.3.2 C
HECKING THE
Verify correct operation of the PCMCIA Adapter using the LED indicators:
Color
Yellow
Green
The LED indicators are useful only if there is an active Access Point in the area.
The LED indicators can be used to verify correct firmware download procedure;
the LEDs turn on and off quickly, one LED being ON while the other is OFF.
4.3.3 I C
NITIAL ONFIGURATION
If your wireless network uses a non-default ESSID, enter the proper ESSID as
follows:
1. Start the WLAN PC Card Configuration utility as described in Section 4.5.
From the Windows Start menu, select Programs - Brz 802.11 Utilities, and then
Configure.
2. Edit the ESSID parameter. Click the WLAN Parameters tab and enter the
ESSID that matches the Access Point.
3. Restart the computer.
56
D
DAPTER RIVERS IN
LED I
NDICATORS
Description
Link Status
Data Traffic
W NT
INDOWS
Meaning
Blink – Scanning
Solid – Associated
Blink – According to traffic