CHAPTER 4: PCMCIA Adapter Installation, Setup, and Management
6. Press the Windows Start button and select Run. Type WINMSD and press OK.
The Windows NT Diagnostics window appears.
Figure 4-1. Windows NT Diagnostics Window.
7. Press IRQ and verify that IRQ 11 is not taken. If it is, find a free IRQ. For
example, in the illustration, IRQ 2 is free.
8. Press Memory and verify that memory from D0000h to D3FFFh is not taken. If
it is, find another free memory location, such as E0000h.
9. Return to the PCMCIA PC Card LAN Adapter Properties window. If the
default values for Memory Address and Interrupt are acceptable, press OK.
Otherwise, enter new values and press OK.
10. Press Close to close each installation window.
11. If configuration windows for other network components (such as Protocol)
appear, enter the requirements according to the instructions of your network
administrator.
12. Restart Windows NT.
55