Resetting The Pcmcia Adapter - Black Box LW0050A Manual

CHAPTER 4: PCMCIA Adapter Installation, Setup, and Management
This tab is not visible when in User login mode. When in Installer login mode, you
can see the parameters. When in Technician login mode, you can edit the
parameters.
The Performance tab contains the following important parameter:
• Rts threshold (bytes) – Minimum packet size to require an RTS (Request To
Send). For packets smaller than this threshold, an RTS is not sent and the
packet is transmitted directly to the WLAN.
4.5.10 R
ESETTING THE
It is necessary to reset the PCMCIA Adapter after making configuration changes via
the Wireless LAN Configuration utility. Perform this procedure as follows:
1. Close the Configuration and Site Survey utilities and then do one of the
following:
Wireless LAN Configuration
Station Status WLAN params
Security Power Management
Performance
Rts threshold (Bytes)
Maximum retransmissions
Dwells to retransmit
Multirate support
Roaming
Joining window
Leaving threshold (dBm)
Joining threshold (dBm)
Num of beacons to disconnect
Neighbor aging time (Sec)
Figure 4-3. Performance Tab.
PCMCIA A
DAPTER
Station Control
Maintenance Radio
1600
1
2
Enable
1
-77
-72
7
20
Undo
OK Cancel
?
Configuration Access
Performance
Apply
65