Installing The Pcmcia Adapter Drivers In Odi Systems - Black Box LW0050A Manual

CHAPTER 4: PCMCIA Adapter Installation, Setup, and Management
Problem 1: Adapter does not function properly.
1. Check Device Manager for conflicts with any other devices and drivers.
2. Right click My Computer, Properties, and then the Device Manager tab.
3. Click Network Adapters to verify status of the Adapter—an exclamation mark
next to the card indicates a conflict.
Problem 2. There is a resolution conflict.
1. Double-click the PCMCIA PCI Card.
2. Select the Resources tab.
3. In the event that the conflicting resources are listed in the conflicting device
list, edit the Memory range and Interrupt to values that do not cause conflicts.
Problem 3. There is no resource conflict, but the card still fails to work. There may
be a conflict with DOS drivers not recognized by Windows.
1. Look for device drivers or lines containing device or call commands in either
the autoexec.bat or the config.sys file.
2. Disable the conflicting drivers and devices, and uninstall and reinstall the card.

4.9 Installing the PCMCIA Adapter Drivers in ODI Systems

The ODI driver supports Novell VLM and NETX clients, Novell TCPIP, Lantastic
v.6 (with ODINSUP), Microsoft Windows 3.11 (with ODINSUP).
The following files are supplied for the DOS ODI environment:
brzwlan.com
brzwlanf.com
brzwlan.ini
brzsetup.exe
net.cfg
brzwlan.ins
1. The ODI driver gets its resources from the Card & Socket Services. Verify that
the PC you are using has Card & Socket Services software installed.
ODI driver file, generic version
ODI driver file for Falcon 310 (supplied only on request)
Default configuration file
Site survey utility
Sample ODI16 configuration file
Installation information for Novell client (DOS and Windows)
75