Connect The Unit To The Power Supply - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
A C
DDITIONAL ONSIDERATIONS
When positioning the Access Points, take into account the following additional
considerations.
Height
Install the Access Point at least 5 feet (1.5 m) above the floor, clear of any high
office partitions or tall pieces of furniture in the coverage area. The Access Point
can be placed on a high shelf, or can be attached to the ceiling or a wall using a
mounting bracket.
Central Location
Install the Access Point in a central location in the intended coverage area. Good
positions are:
• In the center of a large room.
• In the center of a corridor.
• At the intersection of two corridors.
Many modern buildings have partitions constructed of metal or containing metal
components. We recommend that you install the Access Points on the corridor
ceilings. The radio waves propagated by the Pro 11 LAN are reflected along the
metal partitions and enter the offices through the doors or glass sections.

2.4 Connect the Unit to the Power Supply

The unit operates on a power input of 5 VDC (1200 mA, 1500 mA peak) supplied
by the power transformer included with the unit.
• Plug the output jack of the power transformer into the DC input socket on the
unit. This socket may be located on the rear or side panel of the unit.
• Connect the power transformer to a power outlet supplying 110 or 220 VAC.
22
W P
HEN OSITIONING THE
A P
CCESS OINT