Configuration Access Tab - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
• Import – Imports a configuration file to this unit, and overwrites all previous
settings.
• Export – Exports the current configuration of this unit to a file.
4.5.4 C
ONFIGURATION
The Configuration Access tab of the Wireless LAN Configuration utility lets you
log into the Adapter as User, Installer, or Technician, and lets you change the
password.
The Configuration Access tab displays the current mode (User, Installer, or
Technician) in the Present Mode box. This mode determines the security access to
system parameters. Users can view some of the window tabs, but cannot modify
parameters. Installers can view all of the tabs and can modify some of the values.
Technician access rights are reserved for authorized technicians.
When the Configuration utility opens, it will begin at the same mode that was
active when it closed. If security is an issue, change the access mode to User before
you close the utility. The first time the utility is opened, it is set to Installer access
mode.
The default password for Installer mode is User. If security is an issue, change the
Installer password.
To change the Configuration Access mode:
1. Select the radio button next to the desired mode.
2. Type in the password. (No password is necessary to lower the Access Right level.)
3. Click Set Mode. The name of the new mode appears in the Present Mode box.
To change the password for Installer Configuration Access mode:
1. Look at the Present Mode box to verify that you are in Installer mode.
2. Click Change Password.
3. In the Change Password dialog box, type in the new password twice and click
OK. The password has changed.
60
Parameter changes take effect only after reset.
A T
CCESS AB
NOTE