Pcmcia Adapter Installation, Setup, And Management; Packing List; Before You Begin - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
4. PCMCIA Adapter Installation,
Setup, and Management
This chapter describes how to install the PCMCIA Adapter and its associated
firmware, drivers, and utilities. The PCMCIA Adapter Configuration and Site
Survey utilities, which are used to set up and manage the card, are also described
in this chapter.

4.1 Packing List

The PCMCIA Adapter package should contain:
• PCMCIA Adapter (LW0054A or LW0059A).
• Drivers diskette.
• Utilities diskette.
• Installation and Users' Guide.

4.2 Before You Begin

• Verify that the Access Point you are going to use is compliant with the 802.11
standard.
Turn on the Access Point before installing the PCMCIA Adapter, so you can
use the PCMCIA Adapter's LEDs to check the status of the PCMCIA Adapter
when installation is complete. See Section 4.3.2 for more information about
the LEDs.
• When installing in Windows
you, or that the Windows CAB files are installed on your local hard disk in a
directory whose name does not exceed eight letters. When the CAB files are
on the disk, they are usually found in C:\Windows\Options\Cabs.
• When installing in Windows NT
with you, or that the Windows NT distribution files are installed on your local
hard disk. During installation, enter the path of the distribution files whenever
a message appears asking for them.
50
® 95/98, verify that you have the Windows CD with
® , verify that you have the Windows NT CD