Appendix A Supported Mibs And Traps; Supported Mibs; Supported Traps - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
Appendix A. Supported MIBs and
A.1 Supported MIBs
All products in the Pro 11 Series contain an embedded SNMP (Simple Network
Management Protocol) agent. All functions can be accessed from the Management
Information Base (MIB) using an SNMP application.
Pro 11 Series agents support the following MIBs:
• MIB-II (RFC1213)
• BRIDGE-MIB (RFC1286)
• Pro 11 Private MIB
The Pro 11 Private MIB can be viewed by opening the MIB file brz11prv.mib. The
MIB is not included; call Technical Support if you need the Pro 11 Private MIB.
A.2 Supported Traps
The following traps are implemented by the Pro 11 units. All Pro 11 units that have
the SNMP Traps parameter enabled will send traps to the network's designated
managers. The traps can be viewed and filtered using SNMPc.
To enable/disable Trap Sending for a device, use the IP and SNMP Parameters
menu (see Section 3.4.2).
The table on the next page lists the traps implemented by the Pro 11 units.
104
Traps