Black Box LW0050A Manual page 55

CHAPTER 4: PCMCIA Adapter Installation, Setup, and Management
3. If you are running the Windows 95A operating system, refer to Section 4.3.1.2.
If you are running the Windows 95B operating system, refer to Section 4.3.1.3.
4.3.1.2 F W
OR INDOWS
1. Insert the PCMCIA Adapter in the PCMCIA slot on your computer. Windows
95 detects the unit and displays the New Hardware Found window.
2. Select the Driver from disk provided by hardware manufacturer option and
press OK.
3. When prompted for the location of the driver, insert the Black Box drivers
diskette and type A:\ and press OK. The necessary files are copied from the
diskette.
4. When Please insert disk labeled Windows 95 CD-ROM appears, insert the
Windows 95 CD and press OK. If the Windows 95 CAB files are located on your
local hard disk, you can point to that directory (usually found in
\Windows\Options\Cabs).
5. If this is the first time a network card has been installed on this PC, a network
setup window may appear. It is not necessary to fill out this window for the
purposes of this installation.
6. Restart the computer.
4.3.1.3 I
NSTALLATION FOR
1. Insert the PCMCIA Adapter in the PCMCIA slot on your computer. Windows
95 detects the unit, briefly displays the New Hardware Found window, and then
displays the Update Device Driver Wizard window.
2. Insert the Black Box drivers diskette and press Next. When Windows 95
notifies you that it has found the driver, press Finish.
3. If the Windows 95 CAB files are not found automatically, the message Please
insert disk labeled Windows 95 CD-ROM appears. Press OK.
4. If the file BRZCOM.VXD is not found, direct the window to A:\ and press OK.
5. If no other windows appear, the installation is complete. If Please insert disk
labeled Windows 95 CD-ROM appears, press OK, enter the path of the
Windows 95 CAB files, and press OK. Installation is now complete.
6. Restart the computer.
95A
W 95B
INDOWS
53