Basic Installation; Basic Installation Checklist; Check The Packing List - Black Box LW0050A Manual

PRO 11 SERIES WIRELESS ETHERNET
This chapter describes the physical installation of the Pro 11 Series units described
in Chapter 1, with the exception of the PCMCIA Adapter. Installation for the
LW0054A/LW0059A PCMCIA Adapter is described in Chapter 4.
The Pro 11 Series features plug-and-play operation (the unit starts operating
immediately after physical installation with a set of default operation parameters).
A local terminal can be connected to the unit to perform system-specific parameter
settings. The use of a local terminal and the configuration parameters are
described in Chapter 3. In addition, all products in the Pro 11 Series contain an
SNMP agent and can be configured from a remote location via the network.

2.1. Basic Installation Checklist

Standard installation involves these steps:

• Check the packing list.

• Position the unit and the antenna in the best location.
• Connect the power supply to the unit.
• Connect the Ethernet port to the unit.
• Check unit functionality using the LED indicators.
2.2 Check the Packing List
When you first open the package, verify that the unit is complete with the following
components:
• The unit, complete with two omnidirectional antennas or RF connectors for
use with external antennas (for models LW0055A through LW0059A).
• 5-VDC power-supply transformer.
• Mounting bracket for wall or ceiling installations and torque key for antenna
connectors (supplied with models LW0055A through LW0058A).
20

2. Basic Installation