Maintenance Tab; Radio Tab - Black Box LW0050A Manual

CHAPTER 4: PCMCIA Adapter Installation, Setup, and Management
The default Key ID you enter for the PCMCIA Adapter must match the
Key ID defined in the Access Point. Section 3.4.6 describes the
procedure for setting the encryption keys for Access Points.
It is recommended that you change the encryption keys periodically to
enhance system security.
4.5.7 M
AINTENANCE
The Maintenance tab of the Wireless LAN Configuration utility allows you to cause
the unit to verify firmware/driver compatibility, and set how the unit handles 802.3
packets.
This tab is not visible when in User login mode. When in Installer login mode, you
can see the parameters. When in Technician login mode, you can edit the
parameters.
The Maintenance tab contains the following parameters:
• Version Information – Windows drivers are divided into three files: Brzcom.vxd,
Brzwlan.sys, and Brzwlan.inf. The version number of all these files must be
identical. Control information of these files is displayed. The Configuration
utility file is called BrzConfig.exe. The first two numbers of the Configuration
utility version must match the first two numbers of the drivers.
• Disable AppleTalk tunneling — Allows you to disable (default) or enable
AppleTalk tunneling if the network contains a mix of EtherTalk 1 (ET 1) and
EtherTalk 2 (ET 2) stations to ensure smooth communications. Make sure all
units are set to the same tunneling settings.
• Show control on taskbar — Check the box with an icon of the PCMCIA Adapter
on the Windows taskbar. When this option is enabled, you can double-click the
PCMCIA Adapter icon to display the Wireless LAN Configuration utility at any
time.
4.5.8 R T
ADIO AB
The Radio tab of the Wireless LAN Configuration utility allows you to set the
power level of the unit and choose a hopping standard.
This tab is not visible when in User login mode. When in Installer login mode, you
can see the parameters. When in Technician login mode, you can edit the
parameters.
T
AB
NOTE
63