Black Box LW0050A Manual page 56

PRO 11 SERIES WIRELESS ETHERNET
U PCMCIA A
NINSTALLING
1. Press the Windows Start button, select Settings, and then select Control Panel.
Double-click on the PC Card icon, select Wireless LAN PC Card, and click
Stop. Close all active applications.
When asked to restart the computer, press No.
2. From the Windows Start menu, select Settings, and then select Control Panel.
Double-click on the Network icon, click on the Configuration tab, select Brz
802.11 Wireless LAN PC Card, and click Remove.
3. Insert the Black Box Drivers diskette. From the Windows Start menu, select
Run, and type a:\DrvClean.
4. When notified that the PCMCIA PC Card driver has been deleted, click Setup.
5. Restart the computer.
4.3.1.4 I
NSTALLING THE
1. Press the Windows Start button, select Settings, and then select Control Panel.
Double-click on the Network icon.
2. If the message The Windows NT Networking is not installed. Do you want to
install it now? appears, continue with step 2a. If this message does not appear,
continue with step 2b.
a. Press Yes and choose Wired to the network. When a list of supported
network adapters appears, press Have Disk.
b. Click on the Adapters tab, press Add, and then click Have Disk.
3. Insert the Black Box drivers diskette, enter the location of the diskette (such as
a:\) and press OK.
4. From the list choose Brz 802.11 Wireless LAN PC Card and press OK. The
PCMCIA PC Card LAN Adapter Properties window appears.
5. The default settings are memory range D0000h to D3FFFh, IRQ 11. In the
following steps we will verify that these default settings are acceptable for your
machine.
If the PCMCIA PC Card Configuration utility is already installed, you can
access it directly by pressing Advanced.
54
D
DAPTER RIVERS IN
PCMCIA A
DAPTER
NOTE
W 95
INDOWS
D W
RIVERS IN INDOWS
NT