Reach Bee 8 User Manual page 79

REACHBee 8 CL360
User Manual
You can configure the operation authorization, module authorization, and system
authorization to a user group.
Tick off the corresponding authorization in the Operate Auth page as needed.
5.
Click Module Auth to enter the module authorization page as shown in Figure 9-37.
6.
Tick off the corresponding authorization as needed.
7.
Click System Auth to open the system authorization page as shown in Figure 9-38.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-36
Figure 9-37
74