REACHBee 8 CL360
User Manual
The room management authorization is configured based on the user group, not the
individual user. The authorization for a user group takes effect for all users in the user
group.
1.
Tick off View corresponding to a user group. If all user groups are selected, tick of
.
2.
Click OK to configure the authorization of viewing information about the meeting room
to the selected user group.
Note: A user is authorized to manage the meeting room only after the user is
configured with the Classroom Management authorization in Module Auth of User.
Setting advanced recording
The configuration process is identical with that in 9.2.1
9.3.2 Schedule
You can view information about all recording tasks in the Schedule tab. For example, if a
scheduled recording task is added through Advanced record in the Room Management
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-22
Operation
.
65