REACHBee 8 CL360
User Manual
Click Device Name to open the parameter setting page, as shown in Figure 3-26. Enter
the user-defined name of Bee 8 in the blank line and click Save to complete the setting.
3.4.4 FTP Setting
Click FTP Setting to open the parameter setting page, as shown in Figure
3-27.
Note: If a third-party FTP server is used, the media center (lite) cannot be connected to
Bee 8.
A user can connect to an FTP server through the network connection to back up video
files on Bee 8 to the FTP server. When Bee 8 is connected to an FTP server, video files on
Bee 8 cannot be uploaded to the media center (lite).
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-26
Figure 3-27
23