Reach Bee7 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Reach Bee7

User Manual

Documentversion

V1.0

Released date

2013-11

未未未未未未未未未

Document version:

Table of Contents

Summary of Contents for Reach Bee7

Page 1 Reach Bee7 User Manual Documentversion V1.0 Released date 2013-11 未未未未未未未未未 Document version:...
Page 2: Trademark Statement
Any part of this document, including the text, image and graph, is the property of SZ REACH TECH CO., LTD. No part of this document shall be copied in any means without the prior written consent of SZ REACH TECH CO., LTD. Reach reserves the right to revise this document without any prior notice.
Page 4: Product Functions
Product Functions Reach Bee 7 is a high-performance multimedia meeting recording and streaming produce latest developed by Shenzhen Reach IT Co., Ltd. It integrates functions of course recording, course management, and course release. Bee 7 can record the entire teaching process and course content, including the PPT courseware and the teacher’s and students’...
Page 5 (PC or mobile terminal). PC users can get access to the PPT courseware and both the teacher’s and students’ video images; but mobile terminal users only the PPT courseware and the teacher’s video image. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 6 Functions provided by the media center include:  Making interaction with users and connecting Bee 7 through the IP network to carry out operations such as parameter setting and recording management. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 8: Rear Panel Ports Description
Indicator 7 specifies the operation status of Bee 7. When Bee 8 operates normally, indicator 6 blinks; when Bee 8 becomes faulty, indicator 6 goes off. Rear Panel Ports Description All Rights Reserved © SZ REACH TECH CO., LTD.
Page 9 Inputs unbalanced microphone signals. LINE IN Inputs stereo signals. LINE OUT Loops out audio signals input from the 3.5mm TRS interface (LINE IN 11 and 13). MIC IN Inputs balanced microphone signals. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 10 Open the IE browser (IE8 or higher is required), enter the IP address of Bee 7 in the address bar, and press Enter. The Bee 7 Web login interface is displayed as shown in Figure 3-1. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 11 The Bee 7 Web interface is displayed as shown in Figure 3-2. By default, the System info page is displayed, allowing you to check the series number, model, and version of Bee 7. F i gu r e 3 - 2 All Rights Reserved © SZ REACH TECH CO., LTD.
Page 12: Parameter Setting
Select the number of channels as needed in Video Input, as shown in Figure 3-4. Click Save and a dialog box “Save success!” is prompted. Click OK to complete the setting. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 13 Web interface. For example, if DVI IN 1 on the rear panel is connected to input SD signals and DVI IN 2 is connected to input HD signals, to ensure that the All Rights Reserved © SZ REACH TECH CO., LTD.
Page 14: Camera Control
If there is no suitable camera control protocol for the existing camera, you need to upload an appropriate one. Note: Changing the input setting will lead to system reboot. You are recommended to stop recording first. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 15 Click OK to delete the file and a dialog box “Success!” is prompted. Click OK to complete the deletion. 3.2.3 Title/Logo Click Title/Logo to open the parameter setting page, as shown in Figure 3-8. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 17: System Configuration
IP address, Mask, and Gateway. Bee 7 will reboot automatically after the setting, and you can view the configured IP address in the LCD screen. 3.3.2 User Click User to open the parameter setting page, as shown in Figure 3-10. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 18: System Upgrade
Re-enter the new password in Password confirm. Click Save in the System Admin part to complete the setting. 3.3.3 System Upgrade Click System Upgrade to open the parameter setting page, as shown in Figure 3-11. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 19: System Information
Bee 7, remotely control cameras in the classroom, and fine-tune the VGA images. Installing the Management Platform Double-click the installation package to install the management platform as prompted. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 20: Opening The Management Platform
Enter the IP address of Bee 7 in IP Address. Enter a user-defined name of Bee 7 in Device Name. Enter the username in User Name. The default value is admin. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 21: Pc Management Platform Interface
The topmost part of the interface is Tool bar. The left part of the interface is Device list bar. The middle part of the interface is Video display area. The right part of the interface is Operation area. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 22 Disconnect: disconnects a connected Bee 7 by clicking it. Note: Connect and Disconnect are mutually exclusive. Only one of them can be enabled at a time. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 23: Device List Bar
You can view all connected Bee 7 devices in Devices List. Place the mouse on a specific Bee 7 and you can view detailed information, such as IP address of the Bee 7, as shown in Figure 5-3. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 24: Monitoring Mode
In monitoring mode, you can monitor a maximum of nine video pictures concurrently. When the video display mode is non-monitoring, click Monitoring to switch the mode to monitoring, as shown in Figure 5-5. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 25: Operation Area
In the non-monitoring mode, you can perform operations such as remote control, picture fine-tuning, file management, and system management over a single Bee 7. Click in Operations as shown in Figure 5-6 to close the operation area. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 26: Camera Management
REACH Bee7 User Manual F i gu r e 5 - 6 5.4.1 Camera Management Figure 5-7 shows the Camera tab for camera management. F i gu r e 5 - 7 All Rights Reserved © SZ REACH TECH CO., LTD.
Page 27: Picture Adjustment
Click any of the numbers 1 to 4 to adjust the camera direction to the preset position. 5.4.2 Picture Adjustment Figure 5-8 shows the Picture adjust tab. Note that only analog signals, not digital signals, can be adjusted in this tab. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 28 Speed Setting: Options Mid and High control the moving speed of the video image. The higher the speed level, the faster the direction moving. The option Low modifies the color cast of the image. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 29: File Management
Color Switch: enables this function in case of a picture deviation so that the system can make adjustment in self-adaptive mode. Reset: restores the picture of the analog signal to the initial state. 5.4.3 File Management Figure 5-9 shows the Files tab for file management. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 31 Figure 5-10 shows the System tab for parameter setting. F i gu r e 5 - 1 0 Terminal System Upgrade You can upgrade the system version of Bee 7 in this part. All Rights Reserved © SZ REACH TECH CO., LTD.
Page 32 Click Server Management in Configuration management. Click Add. Fill up information about Bee 7 (such as the IP address) in the prompted page. Click OK to add a device (Bee 7). All Rights Reserved © SZ REACH TECH CO., LTD.
Page 33 You can log in to the media center to perform operations over Bee 7, such as parameter setting and recording management. Media Center (Pro) Operation Guide For detailed information, refer to Reach Media Center User Manual V1.0. All Rights Reserved © SZ REACH TECH CO., LTD.

Reach Bee7 User Manual

Quick Links

Related Manuals for Reach Bee7

Summary of Contents for Reach Bee7

Table of Contents