Tool Bar; Device List Bar - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual

5.1 Tool Bar

Device List: opens the device list by clicking it and closes the device list by clicking it
again.
Operations: opens the operation area by clicking it and closes the operation area by
clicking it again.
Add Device: opens the add-device page by clicking it.
Remove Device: deletes a selected Bee 8 by clicking it.
Connect: connects a Bee 8 in the disconnected state by clicking it. After the connection is
established, double-click Room0 of the corresponding Bee 8 to open and play the video
file again.
Disconnect: disconnects a connected Bee 8 by clicking it.
Note: Connect and Disconnect are mutually exclusive. Only one of them can be enabled
at a time.
Language: selects the language of the management platform. Available languages
include simplified Chinese, traditional Chinese and English.
About: displays information (such as version number) about the management platform by
clicking it.
Exit: quits the management platform by clicking it.

5.2 Device List Bar

Click in Devices List as shown in Figure 5-2 to close the device list.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 5-2
29