Image Correcting - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual
3.
Click Confirm to complete the setting.

3.3.6 Image Correcting

Click Image Correcting to open the parameter setting page, as shown in Figure 3-22.
Image Correcting takes effect only on analog signals, not digital signals.
Video input: controls the moving direction of a specific video image (Input 1, Input 2, or
Input 3).
Speed setting: Options Mid and High control the moving speed of the video image. The
higher the speed level, the faster the direction moving. The option Low modifies the color
cast of the image.
Picture position: When Speed setting is set to Mid or High, click
control the moving direction of the video image. When Speed setting is set to Low,
click , , , and
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-21
Figure 3-22
to modify the color cast of the video image.
, , , and to
19