System Upgrade - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual
Enable FTP: If ticked off, recorded video file will be backed up automatically both on Bee
8 and the third-party FTP server.
Server address: specifies the IP address of a third-party FTP server.
Server port: The default value is used and no action is required.
Path: sets the path for saving video files on the third-party server.
Username: specifies the username for logging in to the third-party server (the value is
configured during the setup of the FTP server).
Password: specifies the password for logging in to the third-party server (the value is
configured during the setup of the FTP server).

3.4.5 System Upgrade

Click Sys Upgrade to open the parameter setting page, as shown in Figure 3-28.
System Upgrade
This parameter upgrades the system version of Bee 8. The detailed process is as follows:
1.
Click to select the system upgrade file.
2.
Click Open (O).
3.
Click Upgrade and a dialog box is prompted.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-28
24