Reach Bee 8 User Manual page 76

REACHBee 8 CL360
User Manual
5.
Click Module Auth to enter the module authorization page as shown in Figure 9-30. In
this page, you can access and perform operations over management modules in the
back-end page of the media center (lite).
6.
Tick off the corresponding authorization as needed.
7.
Click System Auth to open the system authorization page as shown in Figure 9-31. In
this page, you can check and configure the system management module and
sub-function modules in the back-end page of the media center (lite).
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-30
Figure 9-31
71