Reach Bee 8 User Manual page 23

REACHBee 8 CL360
User Manual
If there is no suitable camera control protocol for the existing camera, you need to upload
an appropriate one. Note: Changing the input setting will lead to systemreboot. You are
recommended to stop recording first.
1.
Click to select a camera control protocol file (in .ini format) from the local
directory.
2.
Click Open (O)
3.
Click Upload.
4.
Click Save.
Deleting a protocol
1.
Click the drop-down list in PTZ protocol to select a protocol file.
2.
Click Delete and a dialog box is prompted.
3.
Click Confirm to complete the setting.
Setting the address bits of a camera
Set the address bits according to the actual location of the camera. The PC management
platform can remotely control the PTZ only when the camera address set in the Web
interface is identical with the actual camera location. Select the address bits for
corresponding cameras in Video 1, Video 2, and Video 3.
2.
Click Save and a dialog box is prompted, as shown in Figure 3-21.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-20
18