Title /Logo - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual

3.3.7 Title /Logo

Click Title/Logo to open the parameter setting page, as shown in Figure 3-23.
Title setting
1.
Click the drop-down list of Position to select the position of the title text in the video
image. This parameter has three values, Top left, Top right, and None. None
indicates that no title is present.
2.
Enter the title text to be displayed in Title contents.
3.
Tick off Display time to display the system time of Bee 8 in the video image.
4.
Click Save and a dialog box is prompted.
5.
Click Confirm to complete the setting.
Logo setting
Note: The logo image file is in .png format, with its size smaller than 192 x 64.
1.
Click the drop-down list of Position to select the logo position in the video image.
This parameter has five values, Top left, Top right, Bottom left, Bottom right, and
None. None indicates that no logo is present.
2.
Click to select a logo image file from the local directory.
3.
Click Open (O) after a file is selected.
4.
Click Confirm and a dialog box is prompted.
5.
Click Confirm to complete the setting.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-23
20