Reach Bee 8 User Manual page 69

REACHBee 8 CL360
User Manual
1.
Room: specifies the name of a meeting room. The value is user-defined and cannot
be an existing one.
2.
Device IP: specifies the IP address of the Bee 8 configured for the meeting room.
3.
Auth User: specifies the name of an authorized user, which is identical with that of the
Bee 8 server user. The default value is admin.
4.
Auth Password: specifies an authorized password, which is identical with that of the
Bee 8 server. The default value is admin.
5.
Max-Length: specifies the maximum recording duration, in hours. The value can be
1, 2, 4, 6, or 8.
6.
Remark: specifies the description of a meeting room. This parameter can be filled up
only when necessary.
7.
OK: completes the addition operation.
Modifying a room
Tick off a meeting room in the Room Management page and click Modify in the tool bar
to open the Modify room page as shown in 9-21.
You can modify the value of Room, Device IP (Bee 8 IP address), Auth User, Auth
Password, Max-Length, and Remark as needed.
Setting the authorization
Click in a certain room bar to open the Authorization setting page as shown in
Figure 9-22.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-21
64