REACHBee 8 CL360
User Manual
Note: You cannot delete the system configuration.
1.
Select a user group.
2.
Click Delete in the User Group page, and a dialog box is prompted, as shown in
Figure 9-34.
3.
Click OK and a dialog box is prompted, as shown in Figure 9-35.
4.
Click OK to complete the operation. Alternatively, you can take no actions and
just wait the system to automatically close the prompt page in 3 seconds.
Setting the authorization
Click
in the Operate box of the User Group page to open the Authorization
setting page as shown in Figure 9-36.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-34
Figure 9-35
73