Reach Bee 8 User Manual page 32

REACHBee 8 CL360
User Manual
The management platform does not have information about the Bee 8 that is connected to
it for the first time. Therefore, you need to add information about the Bee 8 to the
management platform. A maximum of 8 Bee 8 devices can be added to the PC
management platform.
1.
Click Add Device to open the parameter setting page, as shown in Figure 4-1.
2.
Enter the IP address of Bee 8 in IP Address.
3.
Enter a user-defined name of Bee 8 in Device Name.
4.
Enter the username in User Name. The default value is admin.
5.
Set the password in Password. The default value is admin.
6.
Click OK to complete the device addition.
Bee 8 devices added to the platform can be viewed from the left column of the page, as
shown in Figure 4-2.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 4-1
27