REACHBee 8 CL360
User Manual
8.
Tick off the corresponding authorization as needed.
9.
Click OK and a dialog box is prompted as shown in Figure 9-32.
10.
Click OK or wait for three seconds to complete the operation.
Modifying a user group
1.
Select a user group.
2.
Click Modify in the tool bar of the User Group page to open the Modify group page
as shown in Figure 9-33.
3.
In this page, you can modify the basic information, operation authorization, module
authorization, and system authorization of the selected user group as need.
4.
Click OK to complete the operation.
Deleting a user group
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-32
Figure 9-33
72